Specifications of FAG Bearing HCB7005-EDLR-T-P4S-UL
Additional information
ca H | 133 N/μm | Axial rigidity heavy |
ca L | 55.4 N/μm | Axial rigidity light |
ca M | 96.9 N/μm | Axial rigidity medium |
KaE H | 1338 N | Lift-off force heavy |
KaE L | 117 N | Lift-off force light |
KaE M | 573 N | Lift-off force medium |
FV H | 443 N | Preload force heavy |
FV L | 40 N | Preload force light |
FV M | 194 N | Preload force medium |
Main Dimensions & Performance Data
Cr | 13100 N | Basic dynamic load rating, radial |
C0r | 5400 N | Basic static load rating, radial |
d | 25 mm | Bore diameter |
Cur | 435 N | Fatigue load limit, radial |
nG Grease | 40000 1/min | Limiting speed for grease lubrication |
nG Oil | 63000 1/min | Limiting speed for oil lubrication |
D | 47 mm | Outside diameter |
B | 12 mm | Width |
Dimensions
α | 25 ° | Contact-angle |
r1 min | 0.6 mm | Minimum chamfer dimension |
rmin | 0.6 mm | Minimum chamfer dimension |
Mounting dimensions
da | h12 | Diameter shaft shoulder clearance |
da | 30 mm | Diameter shaft shoulder |
a | 14.4 mm | Distance between the apexes of the pressure cones |
BN | 2.2 mm | Distance ring grooves |
SN | 6.6 mm | Distance to lubrication hole |
ra max | 0.6 mm | Maximum recess radius |
ra1 max | 0.3 mm | Maximum recess radius |
Da | H12 | Shoulder diameter outer ring clearance |
Da | 42 mm | Shoulder diameter outer ring |
SB | 1.4 mm | Width of lubricating groove |
Temperature range
Tmax | 100 ℃ | Operating temperature max. |
Tmin | -30 ℃ | Operating temperature min. |