Specifications of SKF Bearing NJ 328 ECNML
Dimensions
| d | 140.0mm | Bore diameter |
| D | 300.0mm | Outside diameter |
| B | 62.0mm | Width |
| d1 | 195.0mm | Shoulder diameter of inner ring |
| D1 | 251.7mm | Shoulder diameter of outer ring |
| D3 | 290.0mm | Diameter of snap ring groove |
| F | 180.0mm | Chamfer dimension of loose flange ring |
| C2 | 8.0mm | Distance from outer ring side face to snap ring groove |
| b | 5.5mm | Width of snap ring groove |
| r1,2 | 4.0mm | Chamfer dimension |
| r3,4 | 4.0mm | Chamfer dimension |
| s | 3.7mm | Permissible axial displacement |
Abutment dimensions
| da | 157.0mm | Diameter of spacer sleeve |
| da | 175.0mm | Diameter of spacer sleeve |
| db | 199.0mm | Diameter of shaft abutment |
| Da | 282.5mm | Diameter of housing abutment |
| ra | 3.0mm | Radius of fillet |
| rb | 3.0mm | Radius of fillet |
Calculation data
| Basic dynamic load rating | C | 780.0kN |
| Basic static load rating | C0 | 830.0kN |
| Fatigue load limit | Pu | 88.0kN |
| Reference speed | 2400.0r/min | |
| Limiting speed | 4300.0r/min | |
| Minimum load factor | kr | 0.23 |
| Limiting value | e | 0.2 |
| Axial load factor | Y | 0.6 |
Mass
| Mass | 22.4kg |
Associated products
| Angle ring | HJ 328 EC |
