Specifications of SKF Bearing 33030
| Dimension series | 2EE |
Dimensions
| d | 150.0mm | Bore diameter |
| D | 225.0mm | Outside diameter |
| T | 59.0mm | Total width |
| d1 | 188.4mm | Shoulder diameter of inner ring |
| B | 59.0mm | Width of inner ring |
| C | 46.0mm | Width of outer ring |
| r1,2 | 3.0mm | Chamfer dimension of inner ring |
| r3,4 | 2.5mm | Chamfer dimension of outer ring |
| a | 48.221mm | Distance side face to pressure point |
Abutment dimensions
| da | 165.0mm | Diameter of shaft abutment |
| db | 164.5mm | Diameter of shaft abutment |
| Da | 200.0mm | Diameter of housing abutment |
| Da | 212.5mm | Diameter of housing abutment |
| Db | 217.0mm | Diameter of housing abutment |
| Ca | 8.0mm | Minimum width of space required in housing on large side face |
| Cb | 13.0mm | Minimum width of space required in housing on small side face |
| ra | 3.0mm | Radius of shaft fillet |
| rb | 2.5mm | Radius of housing fillet |
Calculation data
| Basic dynamic load rating | C | 487.0kN |
| Basic static load rating | C0 | 865.0kN |
| Fatigue load limit | Pu | 85.0kN |
| Reference speed | 2000.0r/min | |
| Limiting speed | 2600.0r/min | |
| Limiting value | e | 0.37 |
| Axial load factor | Y | 1.6 |
| Axial load factor | Y0 | 0.9 |
Mass
| Mass | 8.04kg |
