TIMKEN Bearing 23032EJW33C3

Spherical bearings are designed to manage high radial loads even when misalignment, poor lubrication, contamination, extreme speeds or critical application stresses are present.
Material: Bearing steels
In Stock:
Photo may not represent actual item. See the technical specification for details.

Specifications of TIMKEN Bearing 23032EJW33C3

TIMKEN Bearing 23032EJW33C3

Specifications

Design Unit

Metric

d – Bore

160 mm

Cage Type

EJ

Cage Material

Steel

Superseded Part

23032CJW33C3

Dimensions

D – Outer Diameter

240 mm9.4488 in

B” – Inner Ring Width

60 mm2.3622 in

B – Outer Ring Width

60 mm2.3622 in

Abutment and Fillet Dimensions

R – Inner Ring “To Clear” Radius1

2 mm0.080 in

r – Outer Ring “To Clear” Radius2

2 mm0.08 in

da – Inner Ring Backing Diameter

180.000 mm7.1000 in

Da – Outer Ring Backing Diameter

224.000 mm8.800 in

Basic Load Ratings

C0 – Static Radial Rating

1040000 N235000 lbf

C1(2) – Dynamic Radial Rating (Two-Rows)

705000 N159000 lbf

Factors

e – ISO Factor3

0.22

Y0 – ISO Factor4

3.05

Y1 – ISO Factor5

3.12

Y2 – ISO Factor6

4.65

Reference Thermal Speed Rating (Grease)

2000 rpm

Reference Thermal Speed Rating (Oil)7

2400 rpm

Cg – Geometry Factor8

0.0892

Product description of TIMKEN Bearing 23032EJW33C3

TIMKEN Bearing 23032EJW33C3, It belongs to TIMKEN Bearing > Spherical Roller Bearings > Spherical Roller Bearings - Steel Cage.

and related type you may also like TIMKEN Bearing 23032EJW33C4.

Misalignment. Contamination. High temperatures. Even extreme speeds or critical stresses can present extra challenges when managing high radial loads. Timken® spherical roller bearings can handle it all, with innovations designed to extend bearing life and boost reliability.

Timken® Spherical Roller Bearings with hardened steel cages deliver greater fatigue strength, increased wear-resistance and tougher protection against shock and acceleration. TIMKEN Bearing 23032EJW33C3,Timken® Spherical Roller Bearings with brass cages provide extra strength and durability in the most unrelenting conditions, including extreme shock and vibration, high acceleration forces and minimal lubrication.

Cages (also referred to as rolling element retainers) serve several purposes in the proper operation of a rolling element bearing. Cages separate the rolling elements and prevent rolling element on rolling element contact and wear. Cages align the rolling elements on the inner ring to prevent rolling element sliding, skidding, and skewing to facilitate true rolling motion. For handling purposes, cages retain the rolling elements on the inner ring assembly to allow for bearing installation. In some instances, cages also improve flow of the lubricant to the bearing inner ring raceways. The following sections discuss the common types of cages used for spherical roller bearings. The basic design geometry, material, and manufacture are discussed for each cage type.

TIMKEN Bearing 23032EJW33C3,Timken® EJ bearings incorporate a unique stamped-steel cage design as shown in next. The EJ design includes two independent cages, one for each row of rollers, which are assembled into an individual bearing. This feature allows each path of cage and rollers to operate independently, and prevents the cage from bending. This cage is guided on the inner ring and runs above pitch. Each cage is surface hardened (nitrided) to provide improved wear resistance as well as additional strength to allow the bearing to operate in even the most severe environment. Face slots have been designed for improved lubrication flow. This can result in a lower operating temperature and longer bearing life.

We are looking for partners and friends,Not only business!

if you need more details,feel free to contact us, e-mail us at [email protected]

Literature & catalogs

TIMKEN -LUBRICATION
Download
TIMKEN -TYPE- TDI
Download
TIMKEN-TAPERED ROLLER BEARING CAGES
Download
TIMKEN-TYPE- TS
Download

Videos

TIMKEN

Timken Tricks of the Trade – Installing a Timken® Set Right® Bearing

Timken Stronger By Design

Timken Tricks of the Trade Wheel End Bearing Removal Tips