SKF Bearing 54409

d=35.0mm, D=100.0mm, B=17.0mm, Mass bearing=3.0kg
Material: Bearing steels
In Stock:
Photo may not represent actual item. See the technical specification for details.

Specifications of SKF Bearing 54409

SKF Bearing 54409
SKF Bearing 54409

Dimensions

d 35.0mm Bore diameter
D 100.0mm Outside diameter
H 78.9mm Height
H1 86.0mm Height bearing including seat washer
D1 47.0mm Inner diameter housing washer
D2 72.0mm Inner diameter sphered seat washer
D3 105.0mm Outside diameter sphered housing washer
B 17.0mm Height shaft washer
C 12.5mm Height sphered housing washer
R 80.0mm Radius sphered housing washer
s 23.5mm Centre height housing washer sphere
r1,2 1.1mm Chamfer dimension housing washer
r3,4 0.6mm Chamfer dimension shaft washer
SKF Bearing 54409
SKF Bearing 54409

Abutment dimensions

da 45.0mm Abutment diameter shaft
Da 72.0mm Abutment diameter housing
ra 1.0mm Fillet radius housing
rb 0.6mm Fillet radius shaft

Calculation data

Basic dynamic load rating C 124.0kN
Basic static load rating C0 240.0kN
Fatigue load limit Pu 9.0kN
Reference speed 1500.0r/min
Limiting speed 2000.0r/min
Minimum load factor A 0.37

Mass

Mass bearing (including seat washer where applicable) 3.0kg

Associated products

Seat washer U 409

Product description of SKF Bearing 54409

SKF Bearing 54409, it belongs to SKF Bearing > Rolling bearings > Ball bearings > Thrust ball bearings > Double direction.

SKF thrust ball bearings are manufactured as single direction (fig. 1) or double direction thrust ball bearings. They are designed to accommodate axial loads only and must not be subjected to any radial load.

In addition to the bearings presented in this section, SKF supplies thrust ball bearings for special application requirements. This assortment includes bearings with Solid Oil and NoWear coated bearings.

consist of one shaft washer, two housing washers and two ball and cage assemblies. The housing washers and ball and cage assemblies of double direction bearings are identical to those used in single direction bearings.

can accommodate axial loads and locate a shaft axially, in both directions.

Thrust ball bearings are classified into those with flat seats or aligning seats depending on the shape of the outer ring seat (housing washer). They can sustain axial loads but no radial loads. For Single-Direction Thrust Ball Bearings, pressed steel cages and machined brass cages are usually used The cages in Double- Direction Thrust Ball Bearings are the same as those in Single-Direction Thrust Ball Bearings of the same diameter series.

Features
Available in two designs: single direction and double direction. To accommodate initial misalignments in an assembly both designs are available with spherical aligning seats or aligning seat washers. High quality steel-ultra clean steel to extend bearing life by up to 80%. Advanced Grease Technology — NSK lubricants that can extend grease life and performance.

High Grade Balls — Quiet and smooth operation even at high speed.

Optional seating rings take initial misalignment.

SKF Bearing 54409, SKF double direction angular contact thrust ball bearings are designed to locate spindle shafts axially in both directions. These bearings are intended for mounting in combination with cylindrical roller bearings in the NN 30 K or N 10 K series in the same housing bore. This bearing combination simplifies machining of the housing bore.

SKF Bearing 54409,Double direction angular contact thrust ball bearings are manufactured with the same nominal bore size and outside diameter as corresponding cylindrical roller bearings. However, the outside diameter tolerance of the housing washers, combined with the housing bore diameter and geometric tolerances recommended for super-precision cylindrical roller bearings under light to normal load and rotating inner ring load (Seat tolerances for standard conditions) will result in an appropriate radial clearance in the housing bore. This clearance is sufficient to prevent radial loads from acting on the thrust bearing provided that its outer ring is not axially clamped in the housing.

You may also like SKF Bearing 54410

We are looking for partners and friends,Not only business!

if you need more details,feel free to contact us, e-mail us at [email protected]

Literature & catalogs

SKF-Angular contact ball bearings
Download
SKF-Self-aligning ball bearings
Download
SKF-Spherical roller bearings
Download
SKF-Thrust bearings
Download
index.php
Download

Videos

SKF-bearing

SKF Cylindrical roller bearings

SKF USA Bearing Remanufacturing Services

SKF Tapered Roller Bearings Mounting and dismounting